Gasoline Injector Test Devices
GDI-6000
-
Specifications +
- It has a specially designed ergonomic structure. (The cabinet section is also a cargo carrying box.)
- Aluminum body test rail and bottle chamber, flexible special test tubes 6X150 (mg) resistant to hot and cold weather conditions.
- From 1 to 6 injectors, with easy connection elements, the injectors are connected in a short time. Thanks to the injector dripping chamber, you can perform detailed directional spray detection. Each test takes a maximum of 90 seconds.
- Thanks to the 200 bar (Electronic Measurement) system specially designed for GDI-6000, it measures pressures accurately. GDI-6000 reaches a maximum of 200 bar. Thanks to this pressure, dripping tests are observed very clearly. With the feature of providing a receipt with a printer, you can present the test results to service centers and organizations that request them.
-
Programs +
- Thanks to the DATABASE, the (mg) values that more than 6000 types of injectors should deliver are visible on the 7.0-inch touch screen.
- Thanks to the NEW-ENJ+ MOD, you can create and save injectors and injections that are not found on the DATABASE page yourself.
- Thanks to the OHM-TEST MOD, you can measure the injector (OHM test) values.
- AUTO-1 Low speed, (4000 RPM)
- AUTO-2 Medium speed, (5000 RPM)
- AUTO-3 High speed, (7000 RPM)
- DRIPPING TEST; Thanks to the Leaking Out mode, you can perform injector dripping (leakage) tests clearly under pressure.
- Thanks to the MANUAL MOD, you can perform the desired speed, power, and time tests with RPM+ PULSE+ and TIMER+ settings.
-
Cleaning Program +
- With CLEANING 1 mode, it performs pressurized cleaning on the injectors by sweeping in the range of 1000-7000 (RPM).
- With CLEANING 2 mode, it performs pressurized cleaning on the injectors by keeping their opening times long.
- REVERSE FLUSHING: With reverse connection elements, professional cleaning of the injector (shaft and nozzle) can be done by supplying fuel from the reverse direction.
- With ULTRASONIC MODE, ultrasonic cleaning can be performed by operating the injectors in the range of 1000 (RPM) - 7000 (RPM).
-
Promotional Video +
-
Contact +
